Refiner Section Count: 3

TOAM-72-HC~NSL01

Product Image TOAM-72-HC~NSL01

True’s open air merchandisers are designed with enduring quality that protects your long term investment. Large, open front allows easy access to display levels and places maximum attention on merchandising. Factory engineered, self-contained refrigeration system using environmentally friendly R290 hydrocarbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). High capacity, factory balanced refrigeration system that maintains cabinet temperatures of 33°F to 40°F (0.5°C to 4.4°C) for the best in food preservation. Patented reversing condenser fan motors. Fan motors reverse during defrost off cycles to help keep condenser coil free from dirt, dust and debris. Keeping coils clean optimizes the unit’s performance providing colder holding temperatures and increased energy efficiency. Regularly scheduled thorough cleaning of coils still recommended. Exterior – non-peel or chip black powder coated cold rolled steel; durable and permanent. Interior – attractive, NSF approved, white aluminum liner. Stainless steel interior floor and deck pans. Eight (8) Adjustable, solid white powder coated cantilever shelves. 3-piece, adjustable for up to 15° tilt in 5° increments. LED interior cabinet lighting and under shelf high output LED interior lighting provides more even lighting throughout the cabinet and illuminates product on each shelf. Glass lower front panel. Durable and break resistant maximizes product visibility.

GDM-69-HC-LD

Product Image GDM-69-HC-LD

The world’s #1 manufacturer of glass door merchandisers. Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydro carbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). High capacity, factory balanced, refrigeration system holds 33°F to 38°F (.5°C to 3.3°C) for best food preservation in extreme conditions. Exterior – non-peel or chip black powder coated cold rolled steel; durable and permanent. Interior – attractive, white aluminum interior liner with stainless steel floor. Self closing doors. Counter-balanced weight system for smooth, even, positive closing. “Low-E”, double pane thermal insulated glass door assemblies with mitered plastic channel frames. The latest in energy efficient technology. LED interior lighting provides more even lighting throughout the cabinet. Safety shielded. Entire cabinet structure is foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

Bottom mounted units feature

  • ”No stoop” lower shelf to maximize product visibility.Storage on top of cabinet.Easily accessible condenser coil for cleaning.

TSSU-72-18M-B-HC~SPEC3

Product Image TSSU-72-18M-B-HC~SPEC3

True’s salad/sandwich units are designed with enduring quality that protects your long term investment. Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydrocarbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). Patented forced-air design holds 33°F to 41°F (.5°C to 5°C) product temperature in food pans and cabinet interior. Complies with and listed under ANSI/NSF-7. Exterior – stainless steel front, top and ends. Corrosion resistant GalFan coated steel back. Stainless steel, patented, foam insulated lid and hood keep pan temperatures colder, lock in freshness and minimize condensation. Removable for easy cleaning. Interior – Stainless steel liner. Stainless steel floor with coved corners. 8–7/8" (226 mm) deep, 1/2" (13 mm) thick, full length removable cutting board included. Sanitary, high density, NSF approved white polyethylene provides tough preparation surface. Heavy duty PVC coated wire shelves. Foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

TSSU-72-24M-B-ST-HC~SPEC3

Product Image TSSU-72-24M-B-ST-HC~SPEC3

True’s salad/sandwich units are designed with enduring quality that protects your long term investment. Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydrocarbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). Patented forced-air design holds 33°F to 41°F (.5°C to 5°C) product temperature in food pans and cabinet interior. Complies with and listed under ANSI/NSF-7. Exterior – stainless steel front, top and ends. Corrosion resistant GalFan coated steel back. Stainless steel, patented, foam insulated lids and hoods keep pan temperatures colder, lock in freshness and minimize condensation. Removable for easy cleaning. Interior – Stainless steel liner. Stainless steel floor with coved corners. 8–7/8" (226 mm) deep, 1/2" (13 mm) thick, full length removable cutting board included. Sanitary, high density, NSF approved white polyethylene provides tough preparation surface. Heavy duty PVC coated wire shelves. Foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

TSSU-72-24M-B-ST-HC

Product Image TSSU-72-24M-B-ST-HC

True’s salad/sandwich units are designed with enduring quality that protects your long term investment. Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydrocarbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). Patented forced-air design holds 33°F to 41°F (.5°C to 5°C) product temperature in food pans and cabinet interior. Complies with and listed under ANSI/NSF-7. Exterior – stainless steel front, top and ends. Corrosion resistant GalFan coated steel back. Stainless steel, patented, foam insulated lids and hoods keep pan temperatures colder, lock in freshness and minimize condensation. Removable for easy cleaning. Interior – attractive, clear coated aluminum liner. Stainless steel floor with coved corners. 8–7/8" (226 mm) deep, 1/2" (13 mm) thick, full length removable cutting board included. Sanitary, high density, NSF approved white polyethylene provides tough preparation surface. Heavy duty PVC coated wire shelves. Foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

TSSU-72-18M-B-HC

Product Image TSSU-72-18M-B-HC

True’s salad/sandwich units are designed with enduring quality that protects your long term investment. Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydrocarbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). Patented forced-air design holds 33°F to 41°F (.5°C to 5°C) product temperature in food pans and cabinet interior. Complies with and listed under ANSI/NSF-7. Exterior – stainless steel front, top and ends. Corrosion resistant GalFan coated steel back. Stainless steel, patented, foam insulated lid and hood keep pan temperatures colder, lock in freshness and minimize condensation. Removable for easy cleaning. Interior – attractive, clear coated aluminum liner. Stainless steel floor with coved corners. 8–7/8" (226 mm) deep, 1/2" (13 mm) thick, full length removable cutting board included. Sanitary, high density, NSF approved white polyethylene provides tough preparation surface. Heavy duty PVC coated wire shelves. Foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

TSSU-72-30M-B-DS-ST-HC

Product Image TSSU-72-30M-B-DS-ST-HC

True’s salad/sandwich units are designed with enduring quality that protects your long term investment. Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydrocarbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). Patented forced-air design holds 33°F to 41°F (.5°C to 5°C) product temperature in food pans and cabinet interior. Complies with and listed under ANSI/NSF-7. Exterior – stainless steel front, top and ends. Corrosion resistant GalFan coated steel back. Stainless steel, patented, foam insulated lids keep pan temperatures colder, lock in freshness and minimize condensation. Removable for easy cleaning. Interior – attractive, clear coated aluminum liner. Stainless steel floor with coved corners. 11–3/4" (299 mm) deep, 1/2" (13 mm) thick, full length removable cutting board included. Sanitary, high density, NSF approved white polyethylene provides tough preparation surface. Heavy duty PVC coated wire shelves. Foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

TSSU-72-30M-B-DS-ST-HC~SPEC3

Product Image TSSU-72-30M-B-DS-ST-HC~SPEC3

True’s salad/sandwich units are designed with enduring quality that protects your long term investment. Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydrocarbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). Patented forced-air design holds 33°F to 41°F (.5°C to 5°C) product temperature in food pans and cabinet interior. Complies with and listed under ANSI/NSF-7. Exterior – stainless steel front, sides, and back. Stainless steel, patented, foam insulated lids keep pan temperatures colder, lock in freshness and minimize condensation. Removable for easy cleaning. Interior – Stainless steel liner. Stainless steel floor with coved corners. 11–3/4" (299 mm) deep, 1/2" (13 mm) thick, full length removable cutting board included. Sanitary, high density, NSF approved white polyethylene provides tough preparation surface. Heavy duty PVC coated wire shelves. Foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

TSSU-72-30M-B-ST-FGLID-HC

Product Image TSSU-72-30M-B-ST-FGLID-HC

True’s salad/sandwich units are designed with enduring quality that protects your long term investment. Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydrocarbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). Patented forced-air design holds 33°F to 41°F (.5°C to 5°C) product temperature in food pans and cabinet interior. Complies with and listed under ANSI/NSF-7. Exterior – stainless steel front, top and ends. Corrosion resistant GalFan coated steel back. Heavy-duty flat glass lid keeps pan temperatures colder and locks in freshness while enabling maximum product visibility. Interior – attractive, clear coated aluminum liner. Stainless steel floor with coved corners. 6–1/8" (156 mm) deep, 1/2" (13 mm) thick, full length removable cutting board. Sanitary, high-density, NSF approved white polyethylene provides tough preparation surface. Heavy duty PVC coated wire shelves. Foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

TSSU-72-30M-B-ST-FGLID-HC~SPEC3

Product Image TSSU-72-30M-B-ST-FGLID-HC~SPEC3

True’s salad/sandwich units are designed with enduring quality that protects your long term investment. Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydrocarbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). Patented forced-air design holds 33°F to 41°F (.5°C to 5°C) product temperature in food pans and cabinet interior. Complies with and listed under ANSI/NSF-7. Exterior – stainless steel front, top and ends. Corrosion resistant GalFan coated steel back. Heavy-duty flat glass lid keeps pan temperatures colder and locks in freshness while enabling maximum product visibility. Interior – Stainless steel liner. Stainless steel floor with coved corners. 6–1/8" (156 mm) deep, 1/2" (13 mm) thick, full length removable cutting board. Sanitary, high-density, NSF approved white polyethylene provides tough preparation surface. Heavy duty PVC coated wire shelves. Foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

TSSU-72-30M-B-ST-HC

Product Image TSSU-72-30M-B-ST-HC

True’s salad/sandwich units are designed with enduring quality that protects your long term investment. Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydrocarbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). Patented forced-air design holds 33°F to 41°F (.5°C to 5°C) product temperature in food pans and cabinet interior. Complies with and listed under ANSI/NSF-7. Exterior – stainless steel front, top and ends. Corrosion resistant GalFan coated steel back. Stainless steel, patented, foam insulated lids and hoods keep pan temperatures colder, lock in freshness and minimize condensation. Removable for easy cleaning. Interior – attractive, clear coated aluminum liner. Stainless steel floor with coved corners. 8–7/8" (226 mm) deep,1/2" (13 mm) thick, full length removable cutting board included. Sanitary, high density, NSF approved white polyethylene provides tough preparation surface. Heavy duty PVC coated wire shelves. Foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).

TSSU-72-30M-B-ST-HC~SPEC3

Product Image TSSU-72-30M-B-ST-HC~SPEC3

True’s salad/sandwich units are designed with enduring quality that protects your long term investment. Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydrocarbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). Patented forced-air design holds 33°F to 41°F (.5°C to 5°C) product temperature in food pans and cabinet interior. Complies with and listed under ANSI/NSF-7. Exterior – stainless steel front, top and ends. Corrosion resistant GalFan coated steel back. Stainless steel, patented, foam insulated lids and hoods keep pan temperatures colder, lock in freshness and minimize condensation. Removable for easy cleaning. Interior – Stainless steel liner. Stainless steel floor with coved corners. 8–7/8" (226 mm) deep,1/2" (13 mm) thick, full length removable cutting board included. Sanitary, high density, NSF approved white polyethylene provides tough preparation surface. Heavy duty PVC coated wire shelves. Foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).