Change Your True OEM Gasket (and Why it Matters)

If you run a commercial kitchen, bar, or foodservice operation, your True refrigerator or freezer is one of the workhorses you rely on every day. Over time, the door gasket — the rubber seal around the perimeter of the door — can wear out, crack, or lose its airtight fit. When that happens, your cooler has to work harder, temperatures can creep up, and energy costs go up. Thankfully, changing the gasket is a DIY-friendly job that you can do in a single afternoon.

Why a Good Gasket Matters

The gasket is more than just a rubber strip — it’s what keeps your unit’s interior sealed tight.
A proper seal:
Maintains consistent temperatures – Reduces energy consumption – Protects food safety – Extends the life of your equipment

Using genuine True OEM gaskets ensures you get a perfect fit engineered to True’s specifications, which helps keep your fridge or freezer running exactly as designed.

Step-by-Step: Changing Your True Gasket

While exact models vary slightly, the basic steps are universal.

1. Remove the Old Gasket
Start by pulling the old gasket away from the door frame. It usually snaps or slides out of a channel. Work your way around the door until the entire gasket is free.

2. Clean the Surface
Before installing the new gasket, clean the channel where it seats. Remove any debris or adhesive residue so the new seal lies flat and uninterrupted.

3. Install the New OEM Gasket
Line up the new gasket and press it into the channel. Most True gaskets simply press into place — you’ll hear a satisfying click as it seats. Make sure all corners and edges are seated firmly.

4. Check the Seal
Once installed, close the door and check that the gasket forms a tight, even seal all around. You can test by placing a piece of paper against the seal — if it slides out easily with no resistance, the seal may not be perfect.

Tips for a Smooth Installation

✔ If your gasket uses screws or clips, keep them organized as you remove and reinstall them
✔ Make sure the gasket isn’t twisted — it should lay flat without folds
✔ If you replaced more than one gasket (like French doors), do one at a time for better alignment