TWT-93D-4

Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8” (millimeters rounded up to next whole number).

• Design

  DESIGN

  • True’s commitment to using the highest quality materials and oversized refrigeration systems provides the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today’s food service marketplace.
• Refrigeration System

  REFRIGERATION SYSTEM

  • Factory engineered, self-contained, capillary tube system using environmentally friendly (CFC free) 134A refrigerant.
  • Oversized, factory balanced refrigeration system with guided airflow to provide uniform product temperatures.
  • Extra large evaporator coil balanced with higher horsepower compressor and large condenser; maintains cabinet temperatures of 33°F to 38°F (.5°C to 3.3°C) for the best in food preservation.
  • Sealed, cast iron, self-lubricating evaporator fan motor(s) and larger fan blades give True worktop units a more efficient low velocity, high volume airflow design. This unique design ensures faster temperature recovery and shorter run times in the busiest of foodservice environments.
  • Condensing unit is accessed from behind front grill; slides out for easy maintenance.
• Cabinet Construction

  CABINET CONSTRUCTION

  • All stainless steel front, top and ends. Corrosion resistant GalFan coated steel back. Top and backsplash are one piece formed construction. Bacteria and food particles cannot be trapped underneath as with other two-piece worktop units.
  • Interior - attractive, NSF approved, clear coated aluminum liner. Stainless steel floor with coved corners.
  • Insulation - entire cabinet structure, solid door, and drawer facings are foamed-in-place using high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP).
• Door

  DOOR / DRAWERS

  • Door or drawer assemblies can be located in any section of the cabinet. Location of door/drawers must be indicated at time of ordering.
  • Door constructed of stainless steel exterior with clear aluminum liner to match cabinet interior. Drawers have stainless steel exterior facings and liners with stainless steel frames.
  • Each door and drawer fitted with 12" (305 mm) long recessed handle that is foamed-in-place with a sheet metal interlock to ensure permanent attachment.
  • Door section - positive seal door swings within cabinet dimensions.
  • Magnetic drawer/door gaskets of one piece construction, removable without tools for ease of cleaning.
  • Drawer section - heavy-duty stainless steel drawer slides and rollers, removable without tools for easy cleaning.
  • Each drawer accommodates two (2) full size 12"L x 20"W x 8"D (305 mm x 508 mm x 204 mm) food pans (sold separately).
• Shelving

  SHELVING

  • Two (2) adjustable, heavy duty PVC coated wire shelves The left and right shelf dimensions are 23–5/8"L x 28"D (601 mm x 712 mm). The center shelf dimension is 25–1/2"L x 28"D (648 mm x 712 mm). Four (4) chrome plated shelf clips included per shelf (door locations subject to customer specification).
  • Shelf support pilasters made of same material as cabinet interior; shelves are adjustable on1/2" (13 mm) increments.
• Model Features

  MODEL FEATURES

  • Evaporator is epoxy coated to eliminate the potential of corrosion.
  • Drawers will support a wide variety of incremental pan size configurations; divider bars available.
  • NSF/ANSI Standard 7 compliant for open food product.
• Electrical

  ELECTRICAL

  • Unit completely pre-wired at factory and ready for final connection to a 115/60/1 phase, 15 amp dedicated outlet. Cord and plug set included.
  • NEMA-5-15R
• Optional Features/Accessories

  OPTIONAL FEATURES/ACCESSORIES Upcharge and lead times may apply.

  • 230 - 240V / 50 Hz.
  • 208 - 230V / 60 Hz.
  • 6" (153 mm) standard legs.
  • 6" (153 mm) seismic/flanged legs.
  • 2–1/2" (64 mm) diameter castors.
  • 3" (85 mm) diameter castors.
  • Barrel locks available for door sections. Requires one per door (factory installed).
  • 30" (762 mm) deep,–1/2" (13 mm) thick, white polyethylene cutting board. Requires “L” brackets.
  • 30" (762 mm) deep,–1/2" (13 mm) thick, composite cutting board. Requires “L” brackets.
  • Heavy duty, 16 gauge tops.
  • Heavy duty package - 16 gauge tops, 20 gauge door, sides and back with stainless interior.
  • Half door bun tray racks (door section only). Each holds up to eleven 18"L x 26"D (458 mm x 661 mm) sheet pans (sold separately).
  • Exterior round digital temperature display (factory installed).