The website will be down for maintenance Tuesday April 15, 2014 at 7:00 PM CDT for approximately 1 Hour.
TRUE MANUFACTURING HOME PAGE
Proud to be Manufactured in the United States
FREQUENTLY ASKED TECHNICAL QUESTIONS
ASK A TRUE TECHNICIAN
New GE Temperature Control Adjustments - Operation Instructions
Jewelers Screw Driver (Small Screw Driver)
GE Control Instructions:
This scale may be used as a guide for measuring degrees of rotation required for altitude correction. The arrows indicate direction of screw rotation.
Turn calibration screw counter clockwise to obtain colder operating temperatures.
Altitude Correction Table:
Calibration Screw Adjusts
Both Cut-In and Cut-Out
Each 1/4 turn of the calibration screw is equal to approximately 2 degrees F. Do not make more than 3/4 turn. After making adjustment measure temperature during three cycles before adjusting again.
COPYRIGHT © 2014 TRUE MANUFACTURING
True Food Service
Serial No. Inquiry
Terms & Conditions
Ask the True Service Dept
Owner Maintenance Videos