| True Food USA | True Food International | True Europe | Beverage Division | Parts eStore |



Note:
If it becomes necessary
to remove the housing
be sure to tape off any interior panel at risk
of being scratched.

REQUIRED TOOLS:   Phillips Head Screwdriver, Hex Head Driver

Step 1

 Step 4
Step 7

Reach to the side of the evaporator coil and remove the permagum from around the control bulb. Remove the control bulb from the sleeve completely. Pull straight out after removing the permagum.
Unplug the cooler. Remove the screws that secure the mounting plate to the evaporator top. ("A")
Step 2 Step 5
Turn the temperature control to the "OFF" position ("0"). Remove the two screws that hold the control to the mounting plate.
Step 3 Step 6
Remove the black control knob on the temperature control. (It pulls off.) Disconnect the two wires from the temperature control box.

True Warehouses
| U.S.A. Warehouses | International Warehouses | International Europe Warehouses |		 Legal
| Terms and Conditions | Privacy Statement |
| True Manufacturing Home |