Step 1	Step 4	Step 7 Pull on bulb to make sure it is seated properly. Step 8 Replace lamp cover. Step 9 Plug in the cabinet. Step 10 If lamp does not illuminate another problem exists.
Unplug the cooler.	Install the new lamp by placing the lamp terminals in the upper lamp holder first.
Step 2	Step 5
Remove lamp cover by squeezing it in the center, twist and pull outward.	Push up on the bulb to recess the upper holder.
Step 3	Step 6
The lamp can then be removed by pushing it up and then out. This will release the lamp from the lower lamp holder. At this point the lamp can be total- ly removed.	With the upward pressure applied, line up the termi- nal on the lower end of the bulb with the lamp holder. Once aligned the lamp will snap into place.